Specification:
Input voltage: 10-30V DC
Output voltage: 1.0-30.0V DC
Max. input current: 9A
Balance current: 0.5A/Cell Max
Charging current: 0.1 - 8.0 A
Discharging current: 0.1 - 1.0 A
Max. charging power: 200 W
Max. discharging power: 10 W
Abnormal voltage alarm: Support
Incorrent cell count setting alarm: Support
Supported battery types and cell: LiFe, LiIon, LiPo, LiHv 1~6S;
Pb 1~12S; NiMH/Cd 1~16S
Working temperature: 0 – 40 ℃
Storage temperature: -20 – 60 ℃
Dimention: 72x72x32 mm
Weight: 120 g
Cable length: 2 m
Important: Keep the car engine running while charging the drone battery with the car charger to prevent the car battery being drained.
In the box: Smart Car Charger x 1set
Compatibility: SplashDrone 4, Fisherman FD1 XT60 battery, Splashdrone 3+, Splashdrone 3
IMPORTANT:
- Please NEVER leave your battery unattended while it is charging, as there could be a fire risk. Do not leave charging overnight.
- Please ensure you charge your battery in an open & well ventilated area that is away from any flammable material. It is also recommended that you charge & store your battery in a fire-proof bag or container (purchased separately).
- Always make sure you have the correct charging settings for the battery you are charging
- Never use or charge a battery that has become swollen OR has any physical damage. Please dispose of immediately.
- Never touch the black and red charging cables together at all, OR attempt to plug the wrong coloured cable into the charging socket (ie. do not plug the black cable into the red socket), as this can be dangerous.
CAUTION:
IMPORTANT NOTE: THIS CHARGER ONLY SUPPORTS THE BATTERIES LISTED ABOVE
WARNING ⚠️ IF BATTERIES ARE NOT PLUGGED IN CORRECTLY IT COULD CAUSE DAMAGE
**It is recommended that you also read this article on LiPo and LiHV Batteries and their care and maintenance. the link is HERE
